This document will inform you how to manage/set up your Cisco office phone.
Accessing Your Voicemail from Your Office Phone
Dial 5000 from the extension you wish to check the messages on
After a few seconds of silence, you will be prompted to enter your pin followed by the # key
Changing Your Password
To change your voicemail password, perform the following steps:
Your newly recorded name plays. Press # to keep it, or 1 to rerecord.
Recording Your Current Greeting
If you are calling from your own phone, and you are asked for a PIN, enter it and press #. If you are calling from an external phone number or are calling from someone else's phone extension; If the system asks for your ID (usually your phone extension), enter it and press #. Then enter your PIN and press # again.
If the system asks for your PIN, press *. At the prompt, enter your ID (usually your phone extension) and press #. Then enter your PIN, and press # again.
After your current or default greeting plays, press 1 to record a new greeting.
At the tone, speak your new greeting. When finished, press #.
Your newly recorded greeting plays. To accept this greeting and continue, press #. If you’d need to record again, press 1.
Forwarding your office phone to an external number
Press "Fwd All"
Dial #1 and phone number (### ### ####)
Test. Make a test call to your office extension.
Reach out to the Help Desk if the test fails.
Access your voicemail from another phone
- Dial 301 405 5100, and press star (*).
- Enter your 4-digit extension(this is your Voicemail ID) and press pound (#).
- Enter your Voicemail PIN and press pound (#). You can also enter the ID and PIN of another voicemail box you own if needed.